Installation and notice of glass partition in bathroom 0

The partition is generally in order to block the view, play space, the entrance of the partition is the most common, the most valuable bedroom partition, and the partition of the toilet to see less, but taking into account the bathroom moisture, so the general use of glass as a health interval off. Whether small Huxing or compound type, toilet glass partitions are able to create a stylish and concise atmosphere, while allowing the entire space more three-dimensional sense. So, what should we pay attention to when installing the glass partition in the bathroom? Now let’s give you an answer.

Is the bathroom partition good?

Generally use 12mm toughened glass, the price is between 200 and 800 yuan. The better the quality, the higher the price, can be customized.

How to make toilet glass partition?

1, first floor tiles and wall tiles, and then do partition, the wall may be the upper and lower error.

2, the stone should be higher than the ground 1.5-2 cm, otherwise it can not achieve the purpose of wet and dry zoning.

3, remember to use the chute, difficult to clean, will stink, affecting indoor air.

4, do not choose jade sand glass, after water becomes transparent, inconvenient.

5, after washing, wipe with dry cloth, and extend the service life.

Method for installing glass partition of toilet

A. first floor tiles and wall tiles, pay attention to the upper and lower walls have errors.

B. brick laying in front of the sewer pipe, installation of floor drain.

C. stone above the ground 1.5 cm ~2 cm, to achieve the purpose of dry and wet division.

Toilet glass partition notice

1, paving tiles and wall tiles, and then do bathroom partitions

Floor tiles must be installed before the sewer pipe, floor drain, take into account the upper and lower walls of the error problems.

2. Consider the water resistance of the doorframe sill

The threshold should be higher than the ground 1.5cm— 2cm, otherwise it will cause inconvenience.

3, the bathtub should install a

For security, the bathtub installed bar, especially the elderly and children at home.

4, electrical plugs should be far away from the bathtub

Plug the appliance away from the bath, just in case.

5, switch power supply to do moistureproof measures

To ensure safety, the use of pull type switch, electrify equipment, plus moisture-proof cover.

6. Glass doors should be made of organic or tempered glass

Use organic or tempered glass to avoid crashing.

Editor’s summary: the above is the bathroom glass partition installation methods and matters related to the introduction of knowledge, and I hope to help friends in this regard! For more information, please continue to focus on our website and the follow-up will present more exciting content. You can also go to the Qijia shopping mall to buy your favorite product!

Toilet glass partition

Leave a Reply

Your email address will not be published. Required fields are marked *